We worked out unique technology of cleaning of equipment, allowing to liquidate any degree of muddiness and return their initial state to the wares.
Equipment and capacities, transport and metallic constructions – all of them need a reliable corrosion protection. And we are able to do her so that a result made happy you long years!
KROK LTD is a dynamically developing company that is specialized on the production of high-quality apparatus on cleaning of internal surface of tubes of heat-exchange equipment. The specialists of enterprise are work out technology and equipment that allows to clear the tubes of any degree of muddiness to the initial state (95%). Modern methods, broadening contacts and exchange with end-user it is allowed experience to decide practically any tasks on cleaning of heat-exchange equipment.
But it is a not only type of our activity. Important direction of our activity is processing and utilization of wastes and production of energy under a motto “energy- from-wastes”
KROK LTD also professionally will execute for you:
KROK LTD work on cleaning of tubes of air-heater from internal sedimentations. Sedimentations were hard and adamantine on all section of tube. By the ordinary methods of cleaning, applied on our TPC, to delete them did not turn out.
With the use of technology of firm KROK 810 tubes were cleared, cleaning quality is very high here, the internal surface of tubes was practically cleaned out to metallic brilliance, without damages. Works are conducted operatively with passing of the set terms on 8 days.
On Zainsk SPRS cleaning of tubes of condensers is produced Krok equipment by the brigade of Krok company. Condensers of block №7 were cleared for 12 days, block № 5 for 5 days during work in a 3 changing (amount of tubes – 11940 on one block, internal diameter a 28 mm, length a 8 m, thickness of carbonate sedimentations are a to 2 mm on a block № 7, to 1 mm – on a block № 5).
Tubes are cleared fully, “to the metal”, that not attainable at cleaning of tubes grandiloquent setting of “АTUMAT”. After the start of blocks temperature pressure of condensers was 5,7 C on a block №7 and 8 C on a block № 5 at a norm 11,1 C and 10,5 C accordingly.
FACEBOOK
